溫州供應PA46 TE250F6并提供注塑工藝 PA-46 TE250F6
功能：
生產廠商：荷蘭DSM
詳細信息：
| 塑料名稱(Polymer) | PA 4/6 | ||
| 廠商名稱(Company) | DSM Engineering Plastics | ||
| 商品名稱(Trade Name) | Stanyl 46 | ||
| 規格(Grade) | TE250F6 | ||
| 特征(Characteristic) | 使成粒狀, 熱穩定 & 難燃劑 | ||
| 加工方法(Process Method) | 射出成型 | ||
| 物性名稱 | 單位 | 測試方法 | |
| 填充劑含量 Filler Content | ％ | ASTM D2584 | 30.00 |
| 比重 Specific Gravity | g/cm3 | ASTM D792 | 1.68 |
| 融點 Melting Point | ℃ | ASTM D789 | 295.00 |
| 流動指數 MFR,(MI) | g/10 min | ? | ? |
| 吸濕率@24h/23℃ Water Absorption | ％ | ASTM D570 | 0.90 |
| 成形收縮率 MD(Mold Shrinkage) | ％ | ASTM D955 | 0.50 |
| 成形收縮率 TD(Mold Shrinkage) | ％ | ? | ? |
| 伸張斷裂強度 Tensile Strength at Break | MPa | ASTM D638 | 79.30 |
| 伸張降伏強度 Tensile Strength at Yield | MPa | ? | ? |
| 斷裂伸張率 Tensile Elongation at Break | ％ | ASTM D638 | 7.00 |
| 伸張彈性系數 Tensile Modulus | MPa | ASTM D638 | 5650.00 |
| 彎曲強度 Flexural Strength | MPa | ASTM D790 | 159.00 |
| 彎曲彈性系數 Flexural Modulus | MPa | ASTM D790 | 5790.00 |
| 艾氏耐沖擊強度(缺口式) Izod Impact Strength (notched) | J/m | ASTM D256 | 101.00 |
| 洛式硬度或秀爾硬度 Rockwell/Shore Hardenes | ? | ? | ? |
| 熱變形溫度 0.46 MPa Heat Distortion Temp | ℃ | ? | ? |
| 熱變形溫度 1.82 MPa Heat Distortion Temp | ℃ | ASTM D648 | 284.00 |
| 線膨脹系數10ˉ5 Coefficient of Linear Thermat Expansion | mm/mm/℃ | ASTM D696 | 3.60 |
| 介電強度 Dielectric Strength | kV/mm | ASTM D149 | 24.00 |
| 介電常數 Dielectric Constant | MHz | ASTM D150 | 4.50 |
